Kategorie: Blog

Compare press-fit, screw and solder pin terminals in IGBT and SiC power modules: current paths, PCB and busbar requirements, rework limits and a practical selection checklist.

Solder voids slow heat flow from the die to the heatsink. This guide compares 2D X-ray, 3D X-ray, acoustic imaging and thermography, explains how void limits are set, and lists what to ask a module supplier.

Dual active bridge (DAB) converters provide isolated, bidirectional power conversion for EV chargers and energy storage. This guide explains how a DAB loads its power modules, what to check when selecting SiC modules and gate drivers, and where HIITIO's SiC range fits.

Switch-mode plating rectifiers turn low-voltage, high-current output into a power-module problem on the primary side. Here is how to match IGBT and SiC modules to voltage, thermal load, and topology.

Choosing the right switch for a solid-state circuit breaker means balancing conduction loss, short-circuit withstand time and voltage class. This guide compares SiC MOSFETs, Si IGBTs and Si MOSFETs, with practical selection advice and HIITIO device and gate driver options.

Electric haul trucks, excavators, and loaders place heavier electrical, thermal, and mechanical loads on power modules than most industrial drives. Here is how to match IGBT and SiC modules to the duty cycle.

Compare the top 10 SiC MOSFET manufacturers, from ST, onsemi, and Infineon to specialist HIITIO. Each profile covers founding, headquarters, core products, flagship devices, and direct links, so engineers and buyers can build a confident shortlist.

Supplier testing is only half the story. Learn which visual, electrical, and isolation checks to run on incoming IGBT and SiC modules, how to set acceptance limits, and how to build a baseline that protects your line.

A power module can be compromised before it ever carries current. Learn how to receive, store, and handle IGBT and SiC modules, build effective ESD controls, and catch problems before installation.